Same Day Shipping Available
Become a Dealer for Exclusive Benefits
Solar Stack Solar Mounting
Solar Stack builds patented aluminum mounting pedestals in Florida that bond to the roof with code-approved foam adhesive, so arrays go up with zero roof penetrations and no rails. PowerStore carries the flush pedestals, tilt kits, and finishing coatings.
Zero Holes, Engineered for Hurricanes
Each pedestal is set in code-approved polyurethane foam adhesive instead of screwed through the roof, keeping the roof warranty intact. The system is approved for Florida's high-velocity hurricane zones and carries nationwide certifications.
- Miami-Dade NOA 24-1216.01 approval for high-velocity hurricane zones
- UL 2703 listed with a bonded path from module clamps to ground lug
- Florida Product Approval FL21074 and ICC-ES report ESR-5606
- Bonds to tile, structural metal, TPO, PVC, EPDM, modified bitumen, and cap sheet roofs
- No rails needed: standard mid and end clamps drop into the pedestal channels
Explore Solar Stack Products
PowerStore lists the SS-8 and SS-12 flush mount pedestals, 5 and 10 degree tilt kits for flat and low-slope roofs, plus the roof-grade acrylic top coat and TPO primer that finish a compliant install. Compare pedestal heights and tilt angles by SKU below.
Mounting Support from PowerStore
Our team helps installers match pedestal size and tilt angle to the roof, plan adhesive and primer needs by roofing type, and spec pedestal counts to local wind loads with practical product guidance and fulfillment support.
Top Solar Stack FAQs with Jim White
Will Solar Stack hold up in a hurricane?
Yes. Solar Stack is Miami-Dade approved for high-velocity hurricane zones, with tested uplift resistance up to 1,200 pounds per 12 inch mount. Pedestal count is engineered to your local wind loads.
What roofs does Solar Stack work on?
It bonds to tile, concrete, structural metal, TPO, PVC, EPDM, modified bitumen, and cap sheet roofs. Shingle roofs are not supported. TPO installs need the matching primer first.
Does Solar Stack need rails or roof penetrations?
No. The pedestals bond to the roof with code-approved foam adhesive, so nothing punctures the roof surface. Standard module mid and end clamps fit the pedestal channels directly, no rails required.
Jim White is the CEO of PowerStore, a trusted provider of solar and storage solutions for over 15 years. Jim has helped professional installers design reliable solar systems nationwide.