Victron SmartSolar MPPT 150/100-MC4 VE.Can (12/24V) *CLEARANCE - SALE FINAL*

SmartSolar Charge Controllers with MC4 VE.Can interface

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers. 

Advanced Maximum Power Point Detection in case of partial shading conditions 
If partial shading occurs, two or more maximum power points (MPP) may be present on the power­voltage curve. 
Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. 
The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. 

Outstanding conversion efficiency 
No cooling fan. Maximum efficiency exceeds 98%. 

Flexible charge algorithm 
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). 

Extensive electronic protection 
Over-temperature protection and power derating when temperature is high. 
PV short circuit and PV reverse polarity protection. 
PV reverse current protection. 

Bluetooth Smart built-in 
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. 

Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth 
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more SmartSolar Charge Controllers. 

VE.Direct or VE.Can 
For a wired data connection to a Color Control GX, other GX products, PC or other devices 

Fully discharged battery recovery function 
Will initiate charging even if the battery has been discharged to zero volts. 
Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. 

VE.Can: the multiple controller solution 
Up to 25 units can be synchronised with VE.Can, and up to 1 O units with Bluetooth 

Remote on-off 
To connect for example to a VE.BUS BMS. 

Programmable relay 
Can be programmed to trip on an alarm, 
or other events.