Schneider Conext XW+ Power Distribution Panel

Conext™ XW+ Power Distribution Panels are factory-wired and labeled to support the integration of multiple Conext XW+ inverter/chargers and Conext MPPT Solar Charge Controllers with a single battery bank. The XW+ PDP ships with breakers, bus bars and cables to install a single XW+ inverter/charger. With space to add wiring and breakers, a single XW+ PDP supports one XW+ inverter/charger, a diesel generator and either a MPPT 80 600 or MPPT 60 150 Solar Charge Controller. The XW+ PDP supports singlephase, split phase, or three-phase installations. A field-reversible door and multiple conduit knockout entry points allow for the XW+ PDP enclosure to be mounted and configured on either side of the inverter/charger. XW+ Power Distribution Panels are designed to save significant time and money during installation, when compared to custom solutions. A mounting bracket and Conext XW+ Conduit Box are also supplied with each XW+ PDP

Included

• Three 60 A, 120/240 Vac, two-pole, Square-D, type QOU, DIN-rail mounted AC breakers for AC input, bypass and AC load (factory-installed), plus five AC breaker expansion postions.
• One GJ 250A 160 Vdc, 3/8” stud DC breaker installed, plus two expansion positions.
• Eight expansion positions for charge controller DC breakers (Note: XW+ supports up to four MPPT 80 600 or four MPPT 60 150 charge controllers)
• One ground terminal bus bar, one neutral terminal bus bar and one battery negative terminal bus bar, 
• One pair #4/0 AWG Arctic Ultraflex Blue™ battery cables (factory installed and labeled, ready to connect)
• #6 AWG Arctic Ultraflex Blue™ AC wiring (factory installed and labeled, ready to connect)